Point-of-use electric tankless · WINTEMP

WINTEMP WM07V 7 kW Point-of-Use Tankless Water Heater

7 kW point-of-use electric tankless, about 29 A at 240 V

7 kW240 V~29 A1 × 30 Amp double-pole breakers1.7 GPM max~0.7 GPM at 70°F rise

Updated October 2026

The short answer

A sensible point-of-use electric tankless for one sink or a low-flow shower.

Delivers
7 kW.
Watch for
Flow drops with cold inlet water.
Suits
One sink or a low-flow shower.
Max flow (maker)
1.7 GPM
Power
7 kW
Voltage
240 V
Amps (maker)
29.1 A
Breakers (maker)
1 × 30 Amp double-pole breakers
Tank
1.7 gal
Prices change often; the button shows today's price.

Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure

What it delivers

The WINTEMP WM07V 7 kW Point-of-Use Tankless Water Heater is a point-of-use electric tankless rated at 7 kW on 240 volts. Its listing gives a maximum flow of 1.7 GPM.

Worked out from its input, it delivers roughly 1.1 GPM when the water only has to rise 45°F, and 0.7 GPM at a 70°F winter rise: less than one 2 GPM shower in summer, less than one 2 GPM shower in winter. Size it to your fixtures.

At 240 volts 7 kW is about 29 amps (the listing states 29 A). The maker calls for 1 × 30 Amp double-pole breakers. Whether your panel can carry it alongside heating and cooking loads is an electrician's call.

Point-of-use units go under or beside one sink, where a short pipe run means hot water in seconds.

Other listed details: features: LED Display, Self-Modulating; connections: 1/2" npt; material: Metal; model: WM07V; warranty: 2 Year.

The listing gives dimensions of 10.3 in (W) x 8.5 in (H) and a weight of 8.4 lb.

Warranty, per the listing: 2 Year.

Right unit for this house?

Install it when

  • One sink or a low-flow shower
  • A far bathroom with a long wait for hot water

Look at another unit when

  • Whole-house hot water
  • Kitchen sinks at full flow in cold climates

Strengths and trade-offs

Strengths

  • 7 kW
  • Up to 1.7 GPM
  • No venting or gas line
  • Breakers stated by the maker

Trade-offs

  • Flow drops with cold inlet water

Install limits

  • Figures are the maker's or seller's own. Flow at a rise is our estimate from the input; gas, venting and electrical work needs a licensed professional.

Rated performance

Every figure below comes from the source shown in brackets. Where the maker doesn't state something, we say so instead of estimating.

Model numberWM07VRetailer
Tank1.7 galRetailer
Dimensions (seller)10.3"W x 8.5"HRetailer
Features (seller)LED Display, Self-ModulatingRetailer
Power7 kWRetailer
Voltage240 VRetailer
Max flow (maker)1.7 GPMRetailer
Product weight8.4 lbRetailer
Warranty2 YearRetailer
MaterialMetalRetailer
Amps (maker)29.1 ARetailer
Breakers (maker)1 × 30 Amp double-pole breakersRetailer
Connections1/2" nptRetailer

Rival units at this flow

More point-of-use water heaters rated for similar demand

Full point-of-use water heaters spec grid · Every WINTEMP unit in the catalog

Final verdict

A sensible point-of-use electric tankless for one sink or a low-flow shower.

Buy this unit

Our links open this exact model's product page. Prices and stock change; check what's included before you order.

Prices change often; the button shows today's price.

Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure

Questions buyers ask

What breakers does the WINTEMP WM07V 7 kW Point-of-Use Tankless Water Heater need?
About 29 amps at 240 volts (7 kW ÷ 240 V). The maker calls for 1 × 30 Amp double-pole breakers. Panel capacity, breakers and wire are confirmed by a licensed electrician from the manual.
How much hot water does the WINTEMP WM07V 7 kW Point-of-Use Tankless Water Heater deliver in winter?
About 0.7 GPM at a 70°F rise and 1.1 GPM at a 45°F rise, estimated from its power and capped at its stated maximum.