Point-of-use electric tankless · APUS

APUS AP-ADSF-45M06 4.5 kW Point-of-Use Tankless Water Heater

4.5 kW point-of-use electric tankless, about 19 A at 240 V

4.5 kW240 V~19 A30A double-pole breaker~0.4 GPM at 70°F rise

Updated October 2026

The short answer

A solid point-of-use electric tankless for one sink or a low-flow shower.

Delivers
4.5 kW.
Watch for
Flow drops with cold inlet water.
Suits
One sink or a low-flow shower.
Power
4.5 kW
Voltage
240 V
Breakers (maker)
30A double-pole breaker
Connections
1/2" npt
Material
Acrylonitrile Butadiene Styrene
Dimensions (seller)
6.5"W x 8.66"H
Prices change often; the button shows today's price.

Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure

What it delivers

The APUS AP-ADSF-45M06 4.5 kW Point-of-Use Tankless Water Heater is a point-of-use electric tankless rated at 4.5 kW on 240 volts.

At a 45°F rise (mild inlet water to a 120°F set point) it holds about 0.7 GPM, less than one 2 GPM shower; in winter, at a 70°F rise, about 0.4 GPM, less than one 2 GPM shower. Try your own inlet temperature.

At 240 volts 4.5 kW is about 19 amps. The maker calls for 30A double-pole breaker. A licensed electrician confirms the panel, the service and the wire before it goes in.

Point-of-use units go under or beside one sink, where a short pipe run means hot water in seconds.

From the listing: connections: 1/2" npt; material: Acrylonitrile Butadiene Styrene; model: AP-ADSF-45M06; warranty: 2 Year Manufacturer Warranty.

The listing gives dimensions of 6.5 in (W) x 8.66 in (H) and a weight of 3.5 lb.

Warranty, per the listing: 2 Year Manufacturer Warranty.

Right unit for this house?

Install it when

  • One sink or a low-flow shower
  • A far bathroom with a long wait for hot water

Look at another unit when

  • Whole-house hot water
  • Kitchen sinks at full flow in cold climates

Strengths and trade-offs

Strengths

  • 4.5 kW
  • No venting or gas line
  • Breakers stated by the maker

Trade-offs

  • Flow drops with cold inlet water

Install limits

  • Figures are the maker's or seller's own. Flow at a rise is our estimate from the input; gas, venting and electrical work needs a licensed professional.

Rated performance

Every figure below comes from the source shown in brackets. Where the maker doesn't state something, we say so instead of estimating.

Model numberAP-ADSF-45M06Retailer
Dimensions (seller)6.5"W x 8.66"HRetailer
Features (seller)3s Instant Hot Water, LED Display, Lightweight, Overheat Protection, Self-ModulatingRetailer
Power4.5 kWRetailer
Voltage240 VRetailer
Product weight3.5 lbRetailer
MaterialAcrylonitrile Butadiene StyreneRetailer
Warranty2 Year Manufacturer WarrantyRetailer
Breakers (maker)30A double-pole breakerRetailer
Connections1/2" nptRetailer

Rival units at this flow

More point-of-use water heaters rated for similar demand

Full point-of-use water heaters spec grid · Every APUS unit in the catalog

Final verdict

A solid point-of-use electric tankless for one sink or a low-flow shower.

Buy this unit

Our links open this exact model's product page. Prices and stock change; check what's included before you order.

Prices change often; the button shows today's price.

Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure

Questions buyers ask

What breakers does the APUS AP-ADSF-45M06 4.5 kW Point-of-Use Tankless Water Heater need?
About 19 amps at 240 volts (4.5 kW ÷ 240 V). The maker calls for 30A double-pole breaker. Panel capacity, breakers and wire are confirmed by a licensed electrician from the manual.
How much hot water does the APUS AP-ADSF-45M06 4.5 kW Point-of-Use Tankless Water Heater deliver in winter?
About 0.4 GPM at a 70°F rise and 0.7 GPM at a 45°F rise, estimated from its power and capped at its stated maximum.