Point-of-use electric tankless · Camplux

Camplux TE06ProN5 6 kW Point-of-Use Tankless Water Heater

6 kW point-of-use electric tankless, about 25 A at 240 V

6 kW240 V~25 A1.5 GPM max~0.6 GPM at 70°F rise

Updated October 2026

The short answer

A practical point-of-use electric tankless for one sink or a low-flow shower.

Delivers
6 kW.
Watch for
Flow drops with cold inlet water.
Suits
One sink or a low-flow shower.
Max flow (maker)
1.5 GPM
Power
6 kW
Voltage
240 V
Tank
1.07 gal
Material
Aluminum, Stainless Steel
Dimensions (seller)
7"W x 10"H
Prices change often; the button shows today's price.

Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure

What it delivers

The Camplux TE06ProN5 6 kW Point-of-Use Tankless Water Heater is a point-of-use electric tankless rated at 6 kW on 240 volts. Its listing gives a maximum flow of 1.5 GPM.

Flow depends on how cold the incoming water is. Our estimate from its input: 0.9 GPM at a 45°F rise, falling to 0.6 GPM at 70°F, which is less than one 2 GPM shower on a cold-climate winter day. Try your own inlet temperature.

At 240 volts 6 kW is about 25 amps. The requirement calculator shows it at 208 V too; an electrician confirms the panel.

It's meant for a single fixture near the unit: it saves the wait for hot water there rather than heating a whole house.

Also on the listing: material: Aluminum, Stainless Steel; model: TE06ProN5.

The listing gives dimensions of 7 in (W) x 10 in (H) and a weight of 4.9 lb.

Right unit for this house?

Install it when

  • One sink or a low-flow shower
  • A far bathroom with a long wait for hot water

Look at another unit when

  • Whole-house hot water
  • Kitchen sinks at full flow in cold climates

Strengths and trade-offs

Strengths

  • 6 kW
  • Up to 1.5 GPM
  • No venting or gas line

Trade-offs

  • Flow drops with cold inlet water
  • Breaker needs not stated

Install limits

  • Figures are the maker's or seller's own. Flow at a rise is our estimate from the input; gas, venting and electrical work needs a licensed professional.

Rated performance

Every figure below comes from the source shown in brackets. Where the maker doesn't state something, we say so instead of estimating.

Model numberTE06ProN5Retailer
Tank1.07 galRetailer
Dimensions (seller)7"W x 10"HRetailer
Features (seller)Auto adjust power input, No Leaking (seperated water line), No corrosion, Touch ControlsRetailer
Power6 kWRetailer
Voltage240 VRetailer
Max flow (maker)1.5 GPMRetailer
Product weight4.9 lbRetailer
MaterialAluminum, Stainless SteelRetailer

Rival units at this flow

More point-of-use water heaters rated for similar demand

Full point-of-use water heaters spec grid · Every Camplux unit in the catalog

Final verdict

A practical point-of-use electric tankless for one sink or a low-flow shower.

Buy this unit

Our links open this exact model's product page. Prices and stock change; check what's included before you order.

Prices change often; the button shows today's price.

Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure

Questions buyers ask

What breakers does the Camplux TE06ProN5 6 kW Point-of-Use Tankless Water Heater need?
About 25 amps at 240 volts (6 kW ÷ 240 V). Panel capacity, breakers and wire are confirmed by a licensed electrician from the manual.
How much hot water does the Camplux TE06ProN5 6 kW Point-of-Use Tankless Water Heater deliver in winter?
About 0.6 GPM at a 70°F rise and 0.9 GPM at a 45°F rise, estimated from its power and capped at its stated maximum.