Point-of-use electric tankless · WINTEMP

WINTEMP YQ-WN8K 8 kW Point-of-Use Tankless Water Heater

8 kW point-of-use electric tankless, about 33 A at 240 V

8 kW240 V~33 A40A DP breaker1.9 GPM max~0.8 GPM at 70°F rise

Updated October 2026

The short answer

A well-specified point-of-use electric tankless for one sink or a low-flow shower.

Delivers
8 kW.
Watch for
Flow drops with cold inlet water.
Suits
One sink or a low-flow shower.
Max flow (maker)
1.9 GPM
Power
8 kW
Voltage
240 V
Amps (maker)
33 A
Breakers (maker)
40A DP breaker
Connections
1/2" npt
Prices change often; the button shows today's price.

Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure

What it delivers

The WINTEMP YQ-WN8K 8 kW Point-of-Use Tankless Water Heater is a point-of-use electric tankless rated at 8 kW on 240 volts. Its listing gives a maximum flow of 1.9 GPM.

Expect about 0.8 GPM with cold winter water (a 70°F rise) and 1.2 GPM when the inlet is milder (45°F rise); that is less than one 2 GPM shower in January. Try your own inlet temperature.

At 240 volts 8 kW is about 33 amps (the listing states 33 A). The maker calls for 40A DP breaker. The requirement calculator shows it at 208 V too; an electrician confirms the panel.

It's meant for a single fixture near the unit: it saves the wait for hot water there rather than heating a whole house.

Listed details: connections: 1/2" npt; material: Acrylonitrile Butadiene Styrene; model: YQ-WN8K; warranty: 2-year.

The listing gives dimensions of 9.7 in (W) x 14 in (H) and a weight of 7.9 lb.

Warranty, per the listing: 2-year.

Right unit for this house?

Install it when

  • One sink or a low-flow shower
  • A far bathroom with a long wait for hot water

Look at another unit when

  • Whole-house hot water
  • Kitchen sinks at full flow in cold climates

Strengths and trade-offs

Strengths

  • 8 kW
  • Up to 1.9 GPM
  • No venting or gas line
  • Breakers stated by the maker

Trade-offs

  • Flow drops with cold inlet water

Install limits

  • Figures are the maker's or seller's own. Flow at a rise is our estimate from the input; gas, venting and electrical work needs a licensed professional.

Rated performance

Every figure below comes from the source shown in brackets. Where the maker doesn't state something, we say so instead of estimating.

Model numberYQ-WN8KRetailer
Dimensions (seller)9.7"W x 14"HRetailer
Features (seller)Fire-retardant ABS casing, LED Display, Leak Detection, Overheat ProtectionRetailer
Power8 kWRetailer
Voltage240 VRetailer
Max flow (maker)1.9 GPMRetailer
Product weight7.9 lbRetailer
Warranty2-yearRetailer
MaterialAcrylonitrile Butadiene StyreneRetailer
Amps (maker)33 ARetailer
Breakers (maker)40A DP breakerRetailer
Connections1/2" nptRetailer

Rival units at this flow

More point-of-use water heaters rated for similar demand

Full point-of-use water heaters spec grid · Every WINTEMP unit in the catalog

Final verdict

A well-specified point-of-use electric tankless for one sink or a low-flow shower.

Buy this unit

Our links open this exact model's product page. Prices and stock change; check what's included before you order.

Prices change often; the button shows today's price.

Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure

Questions buyers ask

What breakers does the WINTEMP YQ-WN8K 8 kW Point-of-Use Tankless Water Heater need?
About 33 amps at 240 volts (8 kW ÷ 240 V). The maker calls for 40A DP breaker. Panel capacity, breakers and wire are confirmed by a licensed electrician from the manual.
How much hot water does the WINTEMP YQ-WN8K 8 kW Point-of-Use Tankless Water Heater deliver in winter?
About 0.8 GPM at a 70°F rise and 1.2 GPM at a 45°F rise, estimated from its power and capped at its stated maximum.