Point-of-use electric tankless · Titan

Titan N85 8.5 kW Point-of-Use Tankless Water Heater

8.5 kW point-of-use electric tankless, about 39 A at 220 V

8.5 kW220 V~39 A2.3 GPM max~0.8 GPM at 70°F rise

Updated October 2026

The short answer

A well-specified point-of-use electric tankless for one sink or a low-flow shower.

Delivers
8.5 kW.
Watch for
Weak at a large winter rise.
Suits
One sink or a low-flow shower.
Max flow (maker)
2.3 GPM
Power
8.5 kW
Voltage
220 V
Material
Titanium
Prices change often; the button shows today's price.

Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure

What it delivers

The Titan N85 8.5 kW Point-of-Use Tankless Water Heater is a point-of-use electric tankless rated at 8.5 kW on 220 volts. Its listing gives a maximum flow of 2.3 GPM.

Expect about 0.8 GPM with cold winter water (a 70°F rise) and 1.3 GPM when the inlet is milder (45°F rise); that is less than one 2 GPM shower in January. Check your house in the planner.

At 220 volts 8.5 kW is about 39 amps. The requirement calculator shows it at 208 V too; an electrician confirms the panel.

Point-of-use units go under or beside one sink, where a short pipe run means hot water in seconds.

Listed details: features: Tankless Design; material: Titanium; model: N85.

Right unit for this house?

Install it when

  • One sink or a low-flow shower
  • A far bathroom with a long wait for hot water

Look at another unit when

  • Whole-house hot water
  • Kitchen sinks at full flow in cold climates

Strengths and trade-offs

Strengths

  • 8.5 kW
  • Up to 2.3 GPM
  • No venting or gas line

Trade-offs

  • Weak at a large winter rise
  • Breaker needs not stated

Install limits

  • Figures are the maker's or seller's own. Flow at a rise is our estimate from the input; gas, venting and electrical work needs a licensed professional.

Rated performance

Every figure below comes from the source shown in brackets. Where the maker doesn't state something, we say so instead of estimating.

Model numberN85Retailer
Features (seller)Tankless DesignRetailer
Power8.5 kWRetailer
Voltage220 VRetailer
Max flow (maker)2.3 GPMRetailer
MaterialTitaniumRetailer

Rival units at this flow

More point-of-use water heaters rated for similar demand

Full point-of-use water heaters spec grid

Final verdict

A well-specified point-of-use electric tankless for one sink or a low-flow shower.

Buy this unit

Our links open this exact model's product page. Prices and stock change; check what's included before you order.

Prices change often; the button shows today's price.

Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure

Questions buyers ask

How many amps does the Titan N85 8.5 kW Point-of-Use Tankless Water Heater draw?
About 39 amps at 220 volts (8.5 kW ÷ 220 V). Panel capacity, breakers and wire are confirmed by a licensed electrician from the manual.
How much hot water does the Titan N85 8.5 kW Point-of-Use Tankless Water Heater deliver in winter?
About 0.8 GPM at a 70°F rise and 1.3 GPM at a 45°F rise, estimated from its power and capped at its stated maximum.