Point-of-use electric tankless · ALisasin

ALisasin WS0374 3.5 kW Point-of-Use Tankless Water Heater

3.5 kW point-of-use electric tankless, about 32 A at 110 V

3.5 kW110 V~32 A6.0 GPM max~0.3 GPM at 70°F rise

Updated October 2026

The short answer

A practical point-of-use electric tankless for one sink or a low-flow shower.

Delivers
3.5 kW.
Watch for
Winter flow is much lower.
Suits
One sink or a low-flow shower.
Max flow (maker)
6 liters per minute
Power
3.5 kW
Voltage
110 V
Material
Acrylonitrile Butadiene Styrene
Dimensions (seller)
6"W x 8"H
Prices change often; the button shows today's price.

Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure

What it delivers

The ALisasin WS0374 3.5 kW Point-of-Use Tankless Water Heater is a point-of-use electric tankless rated at 3.5 kW on 110 volts. Its listing gives a maximum flow of 6.0 GPM.

Flow depends on how cold the incoming water is. Our estimate from its input: 0.5 GPM at a 45°F rise, falling to 0.3 GPM at 70°F, which is less than one 2 GPM shower on a cold-climate winter day. Size it to your fixtures.

At 110 volts 3.5 kW is about 32 amps. The requirement calculator shows it at 208 V too; an electrician confirms the panel.

Small units like this suit one sink or a low-flow shower close by; at a kitchen sink's 1.5 GPM the water won't rise as far.

Also on the listing: material: Acrylonitrile Butadiene Styrene; model: WS0374.

The listing gives dimensions of 6 in (W) x 8 in (H) and shower set in the box.

Right unit for this house?

Install it when

  • One sink or a low-flow shower
  • A far bathroom with a long wait for hot water

Look at another unit when

  • Whole-house hot water
  • Kitchen sinks at full flow in cold climates

Strengths and trade-offs

Strengths

  • 3.5 kW
  • Up to 6.0 GPM
  • No venting or gas line

Trade-offs

  • Winter flow is much lower
  • Breaker needs not stated

Install limits

  • Figures are the maker's or seller's own. Flow at a rise is our estimate from the input; gas, venting and electrical work needs a licensed professional.

Rated performance

Every figure below comes from the source shown in brackets. Where the maker doesn't state something, we say so instead of estimating.

Model numberWS0374Retailer
Dimensions (seller)6"W x 8"HRetailer
Features (seller)Intelligent Temperature Control, Over Temperature Protection, Rapid Heating, Uniform HeatingRetailer
Power3.5 kWRetailer
Voltage110 VRetailer
Max flow (maker)6 liters per minuteRetailer
MaterialAcrylonitrile Butadiene StyreneRetailer

Rival units at this flow

More point-of-use water heaters rated for similar demand

Full point-of-use water heaters spec grid

Final verdict

A practical point-of-use electric tankless for one sink or a low-flow shower.

Buy this unit

Our links open this exact model's product page. Prices and stock change; check what's included before you order.

Prices change often; the button shows today's price.

Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure

Questions buyers ask

What breakers does the ALisasin WS0374 3.5 kW Point-of-Use Tankless Water Heater need?
About 32 amps at 110 volts (3.5 kW ÷ 110 V). Panel capacity, breakers and wire are confirmed by a licensed electrician from the manual.
How much hot water does the ALisasin WS0374 3.5 kW Point-of-Use Tankless Water Heater deliver in winter?
About 0.3 GPM at a 70°F rise and 0.5 GPM at a 45°F rise, estimated from its power and capped at its stated maximum.