Non-condensing gas tankless · RIWORY

RIWORY RWRHT010 102,000 BTU Natural Gas Tankless Water Heater

102,000 BTU/h non-condensing gas tankless, about 3.5 GPM at a 45°F rise

4.3 GPM max102,000 BTU/h~2.2 GPM at 70°F riseNatural gas

Updated October 2026

The short answer

A well-specified non-condensing gas tankless for one shower at a time in cold climates.

Delivers
102,000 BTU/h input.
Watch for
Gas pipe sizing to confirm.
Suits
One shower at a time in cold climates.
Max flow (maker)
4.3 GPM
Input (maker)
102,000 BTU/h
Voltage
120 V AC
Fuel
Natural Gas
Connections
3/4" npt
Material
Copper, Metal
Prices change often; the button shows today's price.

Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure

What it delivers

The RIWORY RWRHT010 102,000 BTU Natural Gas Tankless Water Heater is a non-condensing gas tankless with a 102,000 BTU/h burner and a stated maximum flow of 4.3 GPM.

Expect about 2.2 GPM with cold winter water (a 70°F rise) and 3.5 GPM when the inlet is milder (45°F rise); that is 1 shower at 2 GPM in January. Run your house through the planner.

Gas load at full fire: about 98 cubic feet of natural gas an hour. An older half-inch line that already feeds a furnace often can't spare that, so have a gas fitter check the pipe size and run.

Its exhaust runs hot, so the vent must be the material its manual lists, usually stainless; budget for the vent kit.

Listed details: connections: 3/4" npt; material: Copper, Metal; model: RWRHT010.

The listing gives dimensions of 13.7 in (W) x 21.3 in (H).

Right unit for this house?

Install it when

  • One shower at a time in cold climates
  • Replacing a gas tank heater

Look at another unit when

  • More than 1 winter shower at once
  • Homes without a gas line

Strengths and trade-offs

Strengths

  • 102,000 BTU/h input
  • Up to 4.3 GPM

Trade-offs

  • Gas pipe sizing to confirm
  • Stainless venting costs more
  • Needs periodic descaling

Install limits

  • Figures are the maker's or seller's own. Flow at a rise is our estimate from the input; gas, venting and electrical work needs a licensed professional.

Rated performance

Every figure below comes from the source shown in brackets. Where the maker doesn't state something, we say so instead of estimating.

Model numberRWRHT010Retailer
Dimensions (seller)13.7"W x 21.3"HRetailer
Voltage120 V ACRetailer
Max flow (maker)4.3 GPMRetailer
Input (maker)102,000 BTU/hRetailer
MaterialCopper, MetalRetailer
FuelNatural GasRetailer
Connections3/4" nptRetailer

Rival units at this flow

More gas tankless water heaters rated for similar demand

Full gas tankless water heaters spec grid

Final verdict

A well-specified non-condensing gas tankless for one shower at a time in cold climates.

Buy this unit

Our links open this exact model's product page. Prices and stock change; check what's included before you order.

Prices change often; the button shows today's price.

Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure

Questions buyers ask

What flow does the RIWORY RWRHT010 102,000 BTU Natural Gas Tankless Water Heater give in winter?
From its 102,000 BTU/h input we estimate about 3.5 GPM at a 45°F rise and 2.2 GPM at a 70°F rise, so 1 two-GPM shower with mild inlet water and 1 in a cold winter. The maker's flow chart for this model is the final word.
What size gas line does the RIWORY RWRHT010 102,000 BTU Natural Gas Tankless Water Heater need?
At full fire it uses about 98 cubic feet of natural gas an hour. The pipe size depends on the length of the run and every other gas appliance on it; the maker's manual and a licensed gas fitter decide it.