Non-condensing gas tankless · Rinnai

Rinnai RE199eN Natural Gas Tankless Water Heater

199,000 BTU/h non-condensing gas tankless, about 6.8 GPM at a 45°F rise

9.8 GPM max199,000 BTU/h~4.4 GPM at 70°F riseNatural gas

Updated October 2026

The short answer

A practical non-condensing gas tankless for houses running 2 showers at once in winter.

Delivers
199,000 BTU/h input.
Watch for
Gas pipe sizing to confirm.
Suits
Houses running 2 showers at once in winter.
Max flow (maker)
9.8 GPM
Input (maker)
199,000 BTU/h
Fuel
Natural Gas
Condensing
non-condensing
Connectivity
WiFi
Dimensions (seller)
14.05"W x 27.24"H
Prices change often; the button shows today's price.

Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure

What it delivers

The Rinnai RE199eN Natural Gas Tankless Water Heater is a non-condensing gas tankless with a 199,000 BTU/h burner and a stated maximum flow of 9.8 GPM.

Flow depends on how cold the incoming water is. Our estimate from its input: 6.8 GPM at a 45°F rise, falling to 4.4 GPM at 70°F, which is 2 showers at 2 GPM on a cold-climate winter day. Check it against your own fixtures.

Gas load at full fire: about 192 cubic feet of natural gas an hour. An older half-inch line that already feeds a furnace often can't spare that, so have a gas fitter check the pipe size and run.

Non-condensing indoor units run hot exhaust and vent in the maker's listed vent system (often stainless Category III), which costs more than plastic.

Also on the listing: features: LED Display; connectivity: WiFi; model: RE199eN; warranty: 1 Year Labor, 5 Year Parts.

The listing gives dimensions of 14.05 in (W) x 27.24 in (H) and a weight of 24.15 kg.

Warranty, per the listing: 1 Year Labor, 5 Year Parts.

Right unit for this house?

Install it when

  • Houses running 2 showers at once in winter
  • Replacing a gas tank heater

Look at another unit when

  • More than 2 winter showers at once
  • Homes without a gas line

Strengths and trade-offs

Strengths

  • 199,000 BTU/h input
  • Up to 9.8 GPM

Trade-offs

  • Gas pipe sizing to confirm
  • Stainless venting costs more
  • Scale builds up without flushing

Install limits

  • Figures are the maker's or seller's own. Flow at a rise is our estimate from the input; gas, venting and electrical work needs a licensed professional.

Rated performance

Every figure below comes from the source shown in brackets. Where the maker doesn't state something, we say so instead of estimating.

Model numberRE199eNRetailer
Dimensions (seller)14.05"W x 27.24"HRetailer
Features (seller)LED DisplayRetailer
Max flow (maker)9.8 GPMRetailer
Input (maker)199,000 BTU/hRetailer
Product weight24.15 kgRetailer
Warranty1 Year Labor, 5 Year PartsRetailer
FuelNatural GasRetailer
Condensingnon-condensingRetailer
ConnectivityWiFiRetailer

Rival units at this flow

More gas tankless water heaters rated for similar demand

Full gas tankless water heaters spec grid · Every Rinnai unit in the catalog

Final verdict

A practical non-condensing gas tankless for houses running 2 showers at once in winter.

Buy this unit

Our links open this exact model's product page. Prices and stock change; check what's included before you order.

Prices change often; the button shows today's price.

Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure

Questions buyers ask

What flow does the Rinnai RE199eN Natural Gas Tankless Water Heater give in winter?
From its 199,000 BTU/h input we estimate about 6.8 GPM at a 45°F rise and 4.4 GPM at a 70°F rise, so 3 two-GPM showers with mild inlet water and 2 in a cold winter. The maker's flow chart for this model is the final word.
What size gas line does the Rinnai RE199eN Natural Gas Tankless Water Heater need?
At full fire it uses about 192 cubic feet of natural gas an hour. The pipe size depends on the length of the run and every other gas appliance on it; the maker's manual and a licensed gas fitter decide it.